Mechanical Engineering

DESIGN AND CONSTRUCTION OF A POWERED TOGGLE JACK SYSTEM

Abstract The work of this research or project is to design and construct an electric powered toggle jack which offers easy lifting of loads especially...

DETERMINATION OF THE CHARACTERISTIC STRENGTH PROPERTIES OF MILD STEEL REINFORCEMENT IN ILORIN METROPOLIS

1.0 INTRODUCTION Steel is a man-made material containing 95% of iron. The remaining constituent are small amount of element derived...

PRODUCTION OF ALUMINIUM POTS

ABSTRACT           The aim of this project is to produce aluminum pots through sand casting process.  The cast process involved drawing of element to be cast, making...

OPERATION AND MAINTENANCE OF STEAM BOILER

CHAPTER ONE THE STEAM BOILER 1.0 INTRODUCTION Boilers are pressure vessels designed to heat water or produce steam which can then be used to provide space heating and/...

DESIGN AND PRODUCTION OF CEILING BOARD USING PLASTER OF PARIS (P.O.P) GYPSUM MATERIAL

1.0     INTRODUCTION           This project deals with the design and production of ceiling board using Plaster of Paris gypsum materials. Plaster of Paris is a...

DESIGN AND FABRICATION OF GROUNDNUT SHELLING MACHINE

ABSTRACT           Groundnut shelling machine was designed and fabricated at the department of Mechanical Engineering, institute of Technology, Kwara State Polytechnic Ilorin aimed at increasing...

FABRICATION OF METAL PANEL DOOR

ABSTRACT Security of life and property cannot be over emphasized. Human beings need privacy in their various homes and offices which necessitate the need for...

FABRICATION OF ELECTRICAL POP CORN MACHINE

ABSTRACT An electric pop corn machine is a machine that is used to pop com for human consumption. It uses electricity as its source of...

FABRICATION OF A PEPPER GRINDING MACHINE

Abstract The process of crushing and grinding domestic product into powdered form was approached and achieved in this project work taking into account some necessary...

FABRICATION AND CONSTRUCTION OF WINDOW BURGLAR PROOF

ABSTRACT Burglar proofs are major essential application to building structure activities for the beautification and security of the house such as school subtraction detached garage...

DESIGN AND FABRICATION OF DOMESTIC DEEP FREEZER

ABSTRACT This project is on the design and fabrication of deep freezer for the preservation of items/products and making the items to cool. The project...

DESIGN AND FABRICATION OF A PORTABLE CASSAVA GRATER

ABSTRACT There is need for a hygienic processing of cassava. Prevalent condition in the commercial grating area of this staple food shows a susceptibility of...

DESIGN AND FABRICATION OF A DEEP FREEZER

ABSTRACT This project is on the design and fabrication of deep freezer for the preservation of items/products and making the items to cool. The project...

DISTRIBUTED DATA MINING IN CREDIT CARD FRAUD DETECTION

CHAPTER ONE INTRODUCTION 1.0     Introduction Data mining is the process of sorting through large data sets to identify patterns and establish relationships to solve problems through data...

CHARACTERIZATION OF AZARA COPPER ORE DEPOSIT, NASARAWA STATE, NIGERIA, A RESEARCH PROJECT TOPIC ON MECHANICAL ENGINEERING

  Abstract The characterization of Azara copper ore was carried out. The samples were collected from three different locations in Azara, Awe Local Government Area, Nasarawa...

A STUDY OF THE DEVELOPMENT, CHARACTERISATION AND DEGRADABILITY OF POLYESTER/NANO-LOCUST BEAN PODS ASH COMPOSITE, A RESEARCH PROJECT TOPIC ON MECHANICAL ENGINEERING

  ABSTRACT This study produced locust bean pods ash, reinforcement was increased from 0%LBPA – 12%LBPA; the impact, tensile and flexural strengths increased from 0.03 –...

CORROSION INHIBITION OF DOUBLE THERMALLY-AGED HIGH PRESSURE DIE CAST (SSM-HPDC) Al-Si-Mg ALLOY BY NEEM SEED AND GUAVA LEAF EXTRACTS, A RESEARCH PROJECT TOPIC ON...

  ABSTRACT This study determined the corrosive effect of seawater on as-received and double thermally-aged Al-Si-Mg alloy. It also determined the functional groups present in guava...

DEVELOPMENT AND CHARACTERIZATION OF GLASS CERAMIC FROM COCA-COLA GLASS BOTTLE AND MAGNESITE, A RESEARCH PROJECT TOPIC ON MECHANICAL ENGINEERING

  ABSTRACT In a bid to addressporosity was minimal and decreased with increasing sintering temperature and decreasing particle size. The obtained glass ceramic materials possessed appreciable...

FAILURE ANALYSIS AND DEVELOPMENT OF HIGH WEAR RESISTANT LOCALLY- MANUFACTURED GOLD – MILL GRINDING PLATES, A RESEARCH PROJECT TOPIC ON MECHANICAL ENGINEERING

  Abstract The research work is centered on the alloying elements that are capable of promoting abrasive wear resistant in comparism with the as-received failed grinding...

POTENTIAL-ENHANCEMENT OF DEGRADED ENGINE OIL FOR FRICTION REDUCTION IN COLD UPSET FORGING OF ALUMINIUM ALLOYS, A RESEARCH PROJECT TOPIC ON MECHANICAL ENGINEERING

  ABSTRACT Enhancement of the friction-reducing properties of degraded 20W-50 engine oil by blending with neem and palm kernel oils respectively for application in cold upset-forging...

THE DESIGN AND CONSTRUCTION OF FM RADIO TRANSMITTER, A RESEARCH PROJECT TOPIC ON MECHANICAL ENGINEERING

  ABSTRACT An FM transmitter is an electronic device which, with the aid of an antenna, produces radio waves. The transmitter itself generates a radio frequency...

CONSTRUCTION AND DESIGN OF 12 VOLT CAR BATTERY CHARGER CIRCUIT WITH PHONE CHARGING USB PORT, A RESEARCH PROJECT TOPIC ON MECHANICAL ENGINEERING

  ABSTRACT This project work describes the construction and designing of 12volt car battery charger with USB port for charging mobile phones. The charging process is...

DESIGN AND IMPLEMENTATION OF AN AUTOMATED CAR PLATE NUMBER RECOGNITION SYSTEM, A RESEARCH PROJECT TOPIC ON MECHANICAL ENGINEERING

  CHAPTER ONE INTRODUCTION Massive integration of information technology into all aspects of modern life caused demand for processing vehicles as conceptual resources in information systems. Because...

CONSTRUCTION OF METAL MOULD FOR SOAP PRODUCTION

  ABSTRACT A mould can generally be defined as a pattern constructed for the production of the same shape of the prototype and the constructional material...

DEPARTMENTS

  • Accounting
  • Actuarial Science
  • Adult Education
  • Agricultural Economics
  • Agricultural Engineering
  • Agricultural Extension
  • Agricultural Science
  • Agronomy
  • Anatomy
  • Animal Production
  • Animal Science
  • Applied Microbiology
  • Arabic and Islamic Studies
  • Archaeology
  • Architecture
  • Art & Photography
  • Banking and Finance
  • Biochemistry
  • Biology
  • Biology Education
  • Botany
  • Building Technology
  • Business Administration
  • Business Education
  • Business Management
  • Chemical Engineering
  • Chemistry
  • Chemistry Education
  • Civil Engineering
  • Clothing & Fashion
  • Communication & Media Studies
  • Computer Education
  • Computer Engineering
  • Computer Science
  • Cooperative Economics and Management
  • Counselling and Psychology
  • Creative Arts
  • Criminology
  • Crop Production and Science
  • Curriculum Studies
  • Dentistry and Dental Technology
  • Development Studies
  • Economics
  • Economics Education
  • Educational Administration and Supervision
  • Educational Measurement and Evaluation
  • Electrical Electronics Engineering
  • Elementary Education
  • English and Literary Studies
  • English Language
  • Environmental Health Science
  • Estate Management
  • Evolution
  • Family & Child Studies
  • Fine & Applied Arts
  • Fisheries
  • Food Science and Technology
  • Forestry & Wood Technology
  • French
  • Gender Studies
  • General & Internal Medicine
  • Geography
  • Geology
  • Health & Social Care
  • Health Administration and Management
  • History
  • History and International Studies
  • Home Economics
  • Home Economics Education
  • Human Resource Management
  • Industrial and Labour Relations
  • Industrial Chemistry
  • Industrial Mathematics
  • Industrial Relations and Personnel Management
  • Information Technology
  • Insurance
  • Integrated Science
  • International Business
  • International Law and Diplomacy
  • Introductory Technology
  • Law
  • Library and Information Services
  • Library Studies
  • Linguistics
  • Local Government Studies
  • Management Studies
  • Maritime and Management Technology
  • Marketing
  • Mass Communication
  • Mathematics
  • Mathematics Education
  • Mechanical Engineering
  • Medicine and Surgery
  • Microbiology
  • MSc
  • Nursing and Nursing Science
  • Office System Management
  • Office Technology and Management
  • Peace and Development Studies
  • Performing Arts & Music
  • Petroleum Engineering
  • Pharmacology & Pharmaceutical Medicine
  • Pharmacy
  • Pharmacy Technology
  • PHD
  • Philosophy
  • Physical Health Education
  • Physics
  • Physics Education
  • Physiology
  • Plant Physiology and Crop Ecology
  • Plant Science
  • Political Science
  • Primary Education
  • Project Management Technology
  • Project Topics
  • Public Administration
  • Public Health Technology
  • Public Relation
  • Purchasing and Supply
  • Pyschology
  • Quantity Surveying
  • Radiology & Imaging
  • Religious Studies and Theology
  • Science Laboratory Technology
  • Secondary Education
  • Secretarial Administration
  • Secretarial Studies Education
  • Sex Education
  • Social Policy & Welfare
  • Sociology
  • Software Engineering
  • Soil Science
  • Sports Medicine & Orthopedics
  • Statistics
  • Taxation
  • Theology
  • Urban and Regional Planning
  • Veterinary Medicine
  • Zoology
  • MOST READ PROJECTS

    THE EFFECT OF TAXATION AS AN AID TO ECONOMIC DEVELOPMENT

    Abstract The first need of any modern government is to generate enough revenue which is indeed the breath of its nostril” Thus taxation is by...

    A DISCOURSE ANALYSIS OF NAIRA HAS NO GENDER BY OLUOBAFEMI, A RESEARCH PROJECT TOPIC ON ENGLISH AND LINGUISTIC

      CHAPTER ONE 1.1 INTRODUCTION Discourse to the discourse analysts means actual instances of communicative action in the medium of language. According to Blommert (2005:2) as cited in Johnstone...

    AN APPRAISAL OF THE CURRENT IMPLICATION OF PRIVATIZATION OF NIGERIA TELECOMMUNICATION LIMITED (NITEL)

    CHAPTER ONE 1.1            BACKGROUND OF THE STUDY The problem associated with state- owned  enterprises and monopolies are not peculiar to Nigeria it is true that many developing...

    DEVELOPMENT COMPARATIVE APPROACH TO CAPITAL FLIGHT: THE CASE OF THE MIDDLE EAST AND NORTH AFRICA, 1970-2002

      ABSTRACT capital inflows) and uses of those funds (capital outflows). Capital flight, according to this method, comprises the surplus of capital inflows over foreign exchange...

    EFCC AND FIGHT AGAINST MONEY LAUNDERING IN NIGERIA BETWEEN 2013 AND 2016

    EFCC AND FIGHT AGAINST MONEY LAUNDERING IN NIGERIA BETWEEN 2013 AND 2016.   ABSTRACT The research topic on EFCC and fight against money laundering in Nigeria between 2013 and 2014 aimed at...

    ROLE OF RADIO AND INTERPERSONAL COMMUNICATION IN THE ERADICATION OF MALARIA

    CHAPTER ONE INTRODUCTION BACKGROUND TO THE STUDY Malaria kills a child somewhere in the world every minute. It infects approximately 219 million people each year (range 154...

    THE PROBLEM OF LOGISTICS IN MARKETING FAST FOOD

    CHAPTER ONE INTRODUCTION From many years now, there have been poor logistics management in all aspect of our economy especially in the area of marketing in...

    EFFECT OF COMPUTERISATION OF LIBRARY ON STUDENTS ACADEMY PERFORMANCE

    CHAPTER ONE INTRODUCTION 1.1   BACKGROUND TO THE STUDY Library is a fast growing organization, the ancient methods of maintaining it are no longer dynamic and efficient...

    DESIGN AND IMPLEMENTATION OF EMPLOYEES RECORD MANAGEMENT SYSTEM, USING AKWA IBOM STATE POLYTECHNIC AS A CASE STUDY

    DESIGN AND IMPLEMENTATION OF EMPLOYEES RECORD MANAGEMENT SYSTEM, USING AKWA IBOM STATE POLYTECHNIC AS A CASE STUDY CHAPTER ONE INTRODUCTION According to the state of Florida division...

    POPULATION PRESSURE AND FOOD PRODUCTION IN NIGERIA

    ABSTRACT Today, millions of people in the world are without food especially in the developing world which has been of great concern as stipulated in...